# Best Impact Drivers 2026: 10 Ranked, and Why the Torque Number Lies Source: https://www.ranked10.co.uk/home/best-impact-drivers Published: 2026-09-18 | Updated: 2026-09-19 | Prices checked on Amazon UK on 2026-09-17 Shopping for the best impact driver usually means trusting one big number on the box, and that number is rarely the figure you get when you tighten a fixing. Three of the wrenches here print both figures in the same advert. The ONEVAN claims 1,700 Nm, then states 1,500 Nm for tightening. The Dong Cheng quotes 910 Nm loosening against 698 Nm tightening. The DCA quotes 682 Nm against 520 Nm. That gap is the difference between cracking a seized nut with hammering force and holding a fixing tight enough to stay there. It is the first thing we check. We ranked ten of the best impact drivers on Amazon on three things the listing can actually prove: the torque and speed figures it publishes, whether those figures agree with each other, and the shape of the customer review histogram. Nothing below is invented. No score was borrowed, and no specification came from anywhere except the product page. ## The ranking ### 1. DeWalt DCF887N 18V XR Brushless Impact Driver (Body Only) - Price: £59.95 | Amazon rating: 4.7 from 5,156 ratings - Full review: https://www.ranked10.co.uk/home/best-impact-drivers/dewalt-dcf887n-impact-driver - Buy on Amazon: https://www.amazon.co.uk/dp/B01D4J5JMC?tag=ranked10-21 The best impact driver here by review volume — 5,156 ratings at 4.7, 86% five-star — but the box holds no battery, charger or case. This is the best impact driver here by review volume: 5,156 ratings at 4.7, with 86% of buyers giving five stars and just 2% giving one. For a tool under £60 that is an unusually settled picture. The published figures are where it gets untidy — the same table lists torque as both 200 Nm and 205 Nm, and speed as both 3250 RPM and 3800 RPM. In practice, 200 Nm covers what most buyers need an 18v impact driver for. DeWalt's own bullet gives the maximum bolt diameter as M12, which sits closer to the 205 Nm figure than to the 1,700 Nm claims further down this list. Three speeds, a 6.35 mm hex chuck and a magnetic bit holder handle decking screws, cabinet fixings and light automotive work. The body weighs 1.24 kg according to the bullets; the spec table says 1 kg, and only one of those can be right. That said, this is a naked body. No battery, no charger, no case. If you are not already inside DeWalt's 18V XR system, add the cost of a pack and charger before comparing it with the kits below. The table's '2 Amp Hours' battery capacity describes a battery that is not in the box. Pros: 5,156 ratings at 4.7, 86% of them five-star; Three speeds and a 6.35 mm hex chuck; Maximum bolt diameter stated as M12; 1.24 kg in the bullets, light enough for overhead work; Shares 18V XR batteries with DeWalt's drills and grinders Cons: Bare body: no battery, no charger, no case; Torque listed twice, as 200 Nm and 205 Nm, on one page; Speed listed twice, as 3250 RPM and 3800 RPM; Weight given as 1.24 kg in the bullets and 1 kg in the table ### 2. Einhell Professional PXC 18V Brushless Impact Wrench, 215Nm - Price: £74.99 | Amazon rating: 4.5 from 5,185 ratings - Full review: https://www.ranked10.co.uk/home/best-impact-drivers/einhell-215nm-impact-wrench - Buy on Amazon: https://www.amazon.co.uk/dp/B01M1RJU2O?tag=ranked10-21 The only tool here whose torque figure agrees with itself — 215 Nm in both rows — backed by 5,185 ratings at 4.5. Only one tool in this list prints a single torque figure and keeps to it: 215 Nm under both 'Maximum Torque' and 'Torque'. Meanwhile the DeWalt above prints two. With 5,185 ratings at 4.5, this is also the second most-reviewed item here, though 5 buyers gave it one star. The brushless motor and 2900 RPM top speed suit repeated work rather than a one-off job. Crucially, the listing describes an external square drive with a bit adapter, which places it between a best cordless impact driver and a full impact wrench — the square drive takes sockets, the adapter takes bits. However, the spec table lists amperage as 18 Amps. That is a mains figure on a battery tool and says nothing about runtime. The box contains the wrench and nothing else: no battery, no charger, no case. The real price therefore depends on whether you are already in the Power X-Change family. Pros: 215 Nm stated identically in both torque rows; 5,185 ratings at 4.5, with 73% five-star; Brushless motor and a 2900 RPM top speed; LED lamp plus clockwise and anti-clockwise rotation; Fits the Power X-Change 18V battery family Cons: No battery, charger or case in the box; Amperage listed as 18 Amps — meaningless for an 18V battery tool; Chuck size quoted at 6 mm, small for a wrench; 5 one-star ratings against 73 five-star ### 3. DeWalt DCF850N-XJ 18V XR Compact Brushless Impact Driver - Price: £99.95 | Amazon rating: 4.7 from 1,099 ratings - Full review: https://www.ranked10.co.uk/home/best-impact-drivers/dewalt-dcf850n-impact-driver - Buy on Amazon: https://www.amazon.co.uk/dp/B0B1DKZCF5?tag=ranked10-21 101 mm long and 205 Nm — the smallest body here — yet its own table lists the weight as '1 g' and battery capacity as '18 Volts'. At 101 mm this is the shortest body in the list, and the 3X LED ring genuinely helps under a bonnet or inside a cupboard. It is the best impact driver here for tight gaps, and its 205 Nm matches the cheaper DeWalt above. The listing, however, contradicts itself twice. One bullet says the tool weighs 0.95 kg; the spec table says 1 g. Battery capacity is given as 18 Volts, which is a voltage, not a capacity. In practice, the length is the whole argument for paying £99.95 instead of £59.95. Three speeds, a drop-and-load bit holder you can work one-handed and a 3250 RPM top speed cover the same ground as its cheaper stablemate. There is no battery, charger or case in the box here either. By contrast, buy it only if the compact size earns its premium for you. If most of your work happens at a bench with clearance to spare, the cheaper 18v impact driver higher up this list delivers the same 205 Nm for less. Pros: 101 mm long, the shortest body in this list; 205 Nm, matching the cheaper DeWalt here; 3X LED ring for lighting the workpiece; Drop-and-load bit holder for one-handed changes; 1,099 ratings at 4.7, 86% five-star Cons: Weight listed as '1 g' in the table against 0.95 kg in a bullet; Battery capacity given as '18 Volts', a unit error; Bare body: no battery, charger or case; Costs around £40 more than the 205 Nm DeWalt above ### 4. INGCO 20V Brushless Impact Driver and Impact Drill Twin Pack - Price: £117.99 | Amazon rating: 4.7 from 135 ratings - Full review: https://www.ranked10.co.uk/home/best-impact-drivers/ingco-impact-driver-twin-pack - Buy on Amazon: https://www.amazon.co.uk/dp/B0DHWXBM2N?tag=ranked10-21 A full impact driver kit — 285 Nm driver, 66 Nm drill, two 2.0 Ah batteries and a charger — for £117.99. This is the only true impact driver kit in the top half of this list: a 285 Nm impact driver, a 66 Nm impact drill, two 2.0 Ah batteries, a one-hour charger and a case for £117.99. It carries 135 ratings at 4.7, with 81% of them five-star — a small but consistent sample. The two tools split the work cleanly. The driver runs 0-1600/1900/2600 RPM with up to 2900 BPM, while the drill adds a 13 mm metal chuck and 22+1+1 clutch settings. Meanwhile, the spec table disagrees with the description: it lists the number of speeds as 2 and the speed as 850 RPM, where the bullets quote three ranges topping out at 2600 RPM. Worth noting that both packs are 2.0 Ah, which is small for a 285 Nm brushless motor under load. If you want a best impact driver with battery included rather than a bare body, this is the cheapest route here — but for long sessions on site, a larger pack matters more than the second tool. Pros: Two tools, two 2.0 Ah batteries and a one-hour charger for £117.99; 285 Nm driver with three speed ranges up to 2600 RPM; Impact drill adds a 13 mm chuck and 22+1+1 clutch settings; 135 ratings at 4.7, 81% five-star; Both batteries fit the wider INGCO P20S 20V platform Cons: Table says 2 speeds and 850 RPM; the bullets say three ranges up to 2600 RPM; 2.0 Ah packs are small for a 285 Nm driver; Only 135 ratings, a thin sample next to DeWalt and Einhell; Spec table lists four included components, the bullet lists eight ### 5. WORX WX291 20V Cordless Impact Driver with 2.0 Ah Battery - Price: £79.99 | Amazon rating: 4.7 from 387 ratings - Full review: https://www.ranked10.co.uk/home/best-impact-drivers/worx-wx291-impact-driver - Buy on Amazon: https://www.amazon.co.uk/dp/B07V8JSD7N?tag=ranked10-21 Battery and charger included, 387 ratings at 4.7 — but 170 Nm is the lowest torque figure in this list. At 170 Nm this is the least powerful driver here, and the listing is upfront about it: the figure appears as both 'Maximum Torque' and 'Torque'. What £79.99 buys is a 2.0 Ah battery, a charger and a bit in the box, none of which come with either DeWalt body above. In practice, 170 Nm deals with screws, decking and flat-pack without complaint, and the metal gear housing is the notable build detail. The two-speed variable trigger runs to 2600 RPM. There is one oddity in the table: unit count is listed as '1000.0 gram', a weight dressed up as a quantity. As a best cordless impact driver for a household that owns no other 20V tools, the PowerShare battery is the real draw — it fits the rest of the WORX 20V range. Even so, do not buy it for wheel nuts. At 170 Nm it will not shift a lug nut torqued to spec and left through three winters. For that job you want the wrenches further down this list, which run from 520 Nm to 1,700 Nm. Pros: Battery, charger and bit included at £79.99; 387 ratings at 4.7, 79% five-star; Two-speed variable trigger up to 2600 RPM; Metal gear housing for durability; PowerShare 20V battery fits other WORX tools Cons: 170 Nm, the lowest torque figure here; Unit count listed as '1000.0 gram'; Drilling capacity given as 6.35 mm for both wood and metal; Not up to seized wheel nuts ### 6. INGCO 20V Brushless Impact Driver 285Nm with 2 Batteries - Price: £76.49 | Amazon rating: 4.5 from 134 ratings - Full review: https://www.ranked10.co.uk/home/best-impact-drivers/ingco-20v-impact-driver - Buy on Amazon: https://www.amazon.co.uk/dp/B0D9RL4F52?tag=ranked10-21 The single-tool version of the INGCO twin pack: 285 Nm, three speeds, two batteries and a case for £76.49. Same 285 Nm motor as the twin pack above, but as a driver only, with two 2.0 Ah batteries, a charger and a carrying case for £76.49 — £41.50 less than the pair. It holds 134 ratings at 4.5, and the histogram is less tidy than most here: 6 one-star reviews sit alongside 75 five-star. The three speed settings run 1600/1900/2600 RPM with up to 2900 BPM, and the 6.35 mm hex shank takes standard bits and nut setters. Here the table and the bullets agree — 2600 RPM, 285 Nm, three speeds — which is more than can be said for several tools higher up. On paper it does not stand out among the best impact drivers here, but at 2.8 kg for the whole kit it is easy to carry in one hand. The catch is battery size. Two 2.0 Ah packs will not keep a 285 Nm brushless motor fed through a long day of driving 100 mm screws. At the same time, for occasional jobs around the house or in a van, the spare pack and the hard case make it easier to live with than a bare body. Pros: 285 Nm and three speeds up to 2600 RPM; Two 2.0 Ah batteries plus a one-hour charger; Hard carrying case included at £76.49; 134 ratings at 4.5, 75 five-star; Table and bullets agree on torque, speed and gear count Cons: 6 one-star ratings against 75 five-star; 2.0 Ah packs limit runtime on heavy work; Only 134 ratings, a small sample; 6.35 mm hex shank, so no 1/2 inch sockets ### 7. DCA 20V Brushless Impact Wrench, 682 Nm Loosening - Price: £79.99 | Amazon rating: 4.5 from 71 ratings - Full review: https://www.ranked10.co.uk/home/best-impact-drivers/dca-adpb520-impact-wrench - Buy on Amazon: https://www.amazon.co.uk/dp/B0F37Z51Q3?tag=ranked10-21 Prints both torque figures side by side: 682 Nm loosening, 520 Nm tightening, with 4.0 Ah batteries included at £79.99. The listing prints both torque figures instead of hiding one: 682 Nm for loosening, 520 Nm for tightening. It also breaks the range into four modes — 350 Nm and 420 Nm for lighter work, 520 Nm for trucks and steelwork, and 682 Nm for seized bolts, fitting M12 to M20. The 1/2 inch hog ring square drive settles the impact driver vs impact wrench question: sockets go on here, not hex bits. In practice, 152 mm of body length and 2.0 kg with a 4.0 Ah pack keep it usable in tight arches and overhead. Two 4.0 Ah batteries, a charger, four sockets (17/19/21/22 mm), an extension bar and a belt clip come in the kit. That is more battery capacity than any other tool here apart from the SoarFly and the ONEVAN. The catch is the weight figure. The bullets quote 2.0 kg with a 4.0 Ah battery; the spec table says 1.91 kg with no mention of the battery. Either way, it is not a light tool. It is the best impact driver here for a first wheel-nut job; for driving 50 mm screws all day, the compact DeWalt above is easier on the wrist. Pros: 682 Nm loosening and 520 Nm tightening, both published; Four torque modes from 350 Nm to 682 Nm; Two 4.0 Ah batteries and a charger in the kit; Four impact sockets, extension bar and belt clip included; 152 mm body length for tight arches Cons: Weight given as 2.0 kg with battery in the bullets and 1.91 kg in the table; No hex bit holder for driving screws directly; Ranked 3rd in Impact Wrenches, a narrow category; 71 ratings only, and 8 of them are one-star ### 8. SoarFly 1/2 Inch Cordless Impact Wrench 1200 Nm Kit - Price: £129.99 | Amazon rating: 4.6 from 410 ratings - Full review: https://www.ranked10.co.uk/home/best-impact-drivers/soarfly-1200nm-impact-wrench-kit - Buy on Amazon: https://www.amazon.co.uk/dp/B0GX9SV49T?tag=ranked10-21 1,200 Nm, two 21V 4.0 Ah batteries, five sockets and a case for £129.99 — the most complete kit at the higher torque end. The headline here is 1,200 Nm, and unlike the ONEVAN below, the listing does not split it into two different figures — 1,200 Nm is the stated maximum throughout. For £129.99 you get two 21V 4.0 Ah batteries, a fast charger, five sockets and a carry case. That makes it the best impact driver here for someone who wants the whole kit in one order. Three speed modes, a variable speed trigger and a reverse auto-stop that pauses the tool once a nut breaks free. In theory, that last feature is about not losing fasteners; in practice, it is the detail that separates a usable wheel-change tool from an annoying one. Meanwhile the 5.62 kg spec weight covers the whole kit, not the bare tool — worth noting before you judge it against the 1.9 kg wrenches above. However, this is a heavy, high-torque tool, and it is overkill for furniture and small fixings. At 4.6 from 410 ratings it is well reviewed, but 4 buyers gave it one star. If your heaviest job is assembling a shed, buy something smaller and lighter. Pros: 1,200 Nm stated consistently throughout the listing; Two 21V 4.0 Ah batteries plus a fast charger; Five sockets and a carry case in the kit; Reverse auto-stop to reduce dropped nuts; 410 ratings at 4.6 Cons: 5.62 kg listed for the kit — not a one-handed tool; 4 one-star ratings against 80 five-star; No tightening figure published separately from the 1,200 Nm headline; Bulkier and dearer than needed for light DIY ### 9. Dong Cheng 20V Brushless Impact Wrench, 910 Nm Loosening - Price: £72.24 | Amazon rating: 4.6 from 68 ratings - Full review: https://www.ranked10.co.uk/home/best-impact-drivers/dong-cheng-20v-impact-wrench - Buy on Amazon: https://www.amazon.co.uk/dp/B0F327LVDQ?tag=ranked10-21 Quotes 910 Nm loosening against 698 Nm tightening, then 4 speeds up to 698 Nm — the second-widest gap in this list. Two numbers matter here: 910 Nm loosening and 698 Nm tightening. The listing then breaks the tightening range into four settings — 359, 400, 498 and 698 Nm — so you can see what each mode actually delivers. For mixed garage work it is the strongest tightening figure per pound here, at £72.24. The all-copper brushless motor is quoted at 50% longer runtime and 30% more stable power than a brushed equivalent — manufacturer claims, not test results. Included are a single 4.0 Ah battery, a charger, five impact sockets, an extension bar and a heavy-duty box. At 1.9 kg it sits near the DCA rather than the two 5 kg-plus kits. That said, one 4.0 Ah battery is all you get, so a second pack is an extra cost the DCA and SoarFly kits avoid. With 68 ratings at 4.6, including 4 one-star, the sample is small. And the same rule applies as everywhere else on this page: 698 Nm is the number that holds a fixing, not 910 Nm. Pros: 698 Nm tightening and 910 Nm loosening, both stated; Four torque settings from 359 Nm to 698 Nm; 4.0 Ah battery, charger, five sockets and a heavy-duty box; 1.9 kg — near the light end for a 698 Nm tool; 68 ratings at 4.6, 81% five-star Cons: Only one 4.0 Ah battery supplied; 68 ratings is a small sample; The 30% runtime and stability claims are the seller's own; 910 Nm is a loosening figure and does not apply to tightening ### 10. ONEVAN 1/2 Inch Cordless Impact Wrench 1700 Nm, 2 Batteries - Price: £102.89 | Amazon rating: 4.2 from 70 ratings - Full review: https://www.ranked10.co.uk/home/best-impact-drivers/onevan-1700nm-impact-wrench - Buy on Amazon: https://www.amazon.co.uk/dp/B0GR62M8Q9?tag=ranked10-21 The biggest torque number here, 1,700 Nm — and the biggest gap, because the same listing says tightening is 1,500 Nm. 1,700 Nm is the largest figure in this list, and the same bullet immediately qualifies it: 1,500 Nm for tightening, 1,700 Nm for disassembly. That 200 Nm gap is the widest on this page. At 4.2 from 70 ratings it is also the lowest-rated tool here, with 5 one-star reviews against 67 five-star. The spec sheet supports the heavy-duty framing: 0-2500 RPM, 0-3000 IPM, three forward gears and two reverse, a 1/2 inch square drive covering M12 to M30 standard bolts, and a reverse auto-stop to keep loosened nuts from dropping. Two 4.5 Ah batteries and a fast charger are included, with six sockets from 14 mm to 22 mm. However, at 6.09 kg for the kit it is a two-handed tool for most people, and the 4.2 average is the weakest here by a clear margin. If you need to crack truck hub nuts it earns its place; if you mostly drive screws and assemble furniture, the compact DeWalt or the INGCO will serve you better. Pros: 1,700 Nm disassembly torque, the highest here; Two 4.5 Ah batteries, a fast charger and six sockets; Three forward and two reverse gears; 1/2 inch drive fits M12 to M30 standard bolts; Reverse auto-stop for cleaner nut removal Cons: Tightening is 1,500 Nm, not 1,700 Nm — a 200 Nm gap in the same bullet; 4.2 from 70 ratings, the lowest score on this page; 6.09 kg for the kit; 5 one-star and 6 two-star ratings against 67 five-star ## Verdict Choosing the best impact driver for a home toolbox or a garage comes down to one figure. For most homes, the DeWalt DCF887N at £59.95 is the sensible entry point: 5,156 ratings at 4.7, 86% of them five-star, and a route into the 18V XR battery platform if you already own it. However, it ships as a bare body, so add battery and charger costs if you own none. If you need to shift wheel nuts rather than drive screws, the Dong Cheng at £72.24 quotes 698 Nm tightening against 910 Nm loosening, and the DCA at £79.99 does the same split at 520 Nm and 682 Nm. In short, buy the best impact driver on its tightening figure, not its headline one — that rule matters more than any badge.