# SSimder MIG-140 140A 3-in-1 Gasless MIG Welder

Source: https://www.ranked10.co.uk/home/best-mig-welders/ssimder-140a-mig-welder
Ranked #8 in "Best MIG Welder 2026: 10 Ranked by Numbers That Add Up": https://www.ranked10.co.uk/home/best-mig-welders

- Price: £79.99 (checked on Amazon UK on 2026-09-15)
- Amazon rating: 4.4 from 269 ratings
- Buy on Amazon: https://www.amazon.co.uk/dp/B09YQYZ6ZP?tag=ranked10-21

The SSimder 140A is a 3-in-1 machine — gasless flux core MIG, Stick (ARC) and Lift TIG — built around an IGBT inverter and sold on the listing for £79.99, with 4.4 out of 5 from 269 ratings. It sits at number 8 in this guide, and it is here for an unusual reason: it is the one welder in the group whose two headline numbers survive being read against each other. The listing quotes 140A of output and a wattage of 3 KW. At 240V, 3 KW works out at about 12.5A drawn from the socket, which a 13A domestic circuit will supply — the exact check that the bestarc MIG145 (12000 watts) and the Draper Storm Force 100A (230 watts) both fail.

Not every number lines up. The specification table gives the item weight as 5.68 kg, while the bullet copy in the same listing calls it 'just 11 lbs' — about 5.0 kg, a gap of roughly 0.7 kg. That is the same kind of contradiction the Reboot, HZXVOGEN and SPRIGHOLLY listings show, just smaller. Every figure on this page is taken from the Amazon product listing and the customer reviews shown there, not from any test of our own.

## Specification

| Field | Value |
|---|---|
| Price | £79.99 |
| Rating | 4.4 out of 5, from 269 ratings |
| Output | 140A, MIG / Stick (ARC) / Lift TIG |
| Input (as listed) | 240 Volts, Wattage 3 KW — about 12.5A at 240V |
| Item weight (spec table) | 5.68 kg |
| Weight in bullet copy (as listed) | 'just 11 lbs' — about 5.0 kg |
| Colour (as listed) | Mig-140 |
| Best Sellers Rank | 23 in MIG Welding Equipment |

## Questions people ask

**Does the SSimder 140A need a gas cylinder?**

No. The listing describes it as a gasless flux core machine and says no gas cylinder is needed; a 1 lb spool of E71T-GS wire in .030/.035 is included.

**What thickness does the listing say it will weld?**

The MIG bullet names thin auto exhaust at 18-20 gauge, which is roughly 0.9 to 1.2 mm. No maximum thickness is quoted for Stick or TIG.

**Is the 3 KW figure consistent with a 140A welder?**

At 240V, 3 KW is about 12.5A from the socket — inside what a 13A domestic circuit supplies. It is the arithmetic check the other welders in this guide do not pass.

**What does it weigh?**

The specification table lists 5.68 kg. The bullet copy in the same listing says 'just 11 lbs', which is about 5.0 kg — a difference of roughly 0.7 kg between the two.

**What is in the box?**

The listed included components are a 1 lb spool of flux core wire, a MIG welding gun, the MIG-140 welder and a user manual, with a ground clamp and electrode holder named in the starter-kit bullet.

**How is it rated?**

4.4 out of 5 from 269 ratings. The star breakdown supplied with the listing accounts for 100 ratings, of which 73 are five-star.