# InoKraft MaXpray M1 Airless Paint Sprayer

Source: https://www.ranked10.co.uk/home/best-paint-sprayers/inokraft-maxpray-m1-airless-sprayer
Ranked #5 in "Best Paint Sprayer 2026: 10 Ranked, and the Spec Fields That Don't Add Up": https://www.ranked10.co.uk/home/best-paint-sprayers

- Price: £186.99 (checked on Amazon UK on 2026-09-15)
- Amazon rating: 4.1 from 135 ratings
- Buy on Amazon: https://www.amazon.co.uk/dp/B0D5HW68VY?tag=ranked10-21

The InoKraft MaXpray M1 sits at number five in this guide. It is a corded electric airless sprayer at £186.99, rated 4.1 out of 5 from 135 ratings, and Amazon's own ranking places it fourth among paint sprayers. The listing puts its output at 0.31 GPM (1.17 L/min) at 3000 PSI, and the kit — 7.6 m hose, 12" tip extension, extension pole, goggles — is clearly aimed at whole rooms, ceilings and exteriors rather than touch-ups.

The number that does not survive contact with the spec table is the tank. The 'Tank Volume' field says 10 Gallons, but the 'Included Components' field lists no tank at all: just the hose, an extension pole, anti-fog goggles, a cleaning kit, a wrench set and the tip extension. The 'Colour' field labels this the 'Large Project' version, and one reviewer on the page describes the sprayer sucking paint straight from a bucket. On this listing, 10 gallons reads as a stated project size rather than a container you fill. Everything here is taken from the Amazon listing, not from testing of our own.

## Specification

| Field | Value |
|---|---|
| Price | £186.99 |
| Rating | 4.1 out of 5 from 135 ratings |
| Output (as listed) | 0.31 GPM (1.17 L/min) at 3000 PSI |
| Tank Volume (as listed) | 10 Gallons — no tank appears in the Included Components |
| Hose Length | 25 Feet (7.6 m), matching the 7.6m Hose in Included Components |
| Included Components | 7.6m Hose, Extension Pole, Anti-Fog Goggles, Cleaning Kit, Wrench Set, 12" Tip Extension |
| Item Weight | 10.2 kg |
| Best Sellers Rank | 4 in Paint Sprayers (5,352 in DIY & Tools) |

## Questions people ask

**Does the InoKraft MaXpray M1 need the paint thinned first?**

The listing says no pre-thinning is needed. It states the MaXpray M1 uses the AtoMax spray tip to deliver smooth, even coatings with minimal overspray.

**How much pressure does the InoKraft MaXpray M1 run at?**

The title and bullets state up to 3000 PSI, paired in the bullets with a flow rate of 0.31 GPM (1.17 L/min). This listing carries no separate maximum-pressure field to check that figure against.

**Does the InoKraft MaXpray M1 have a 10-gallon tank?**

The 'Tank Volume' field says 10 Gallons, but the Included Components list contains no tank, and the Colour field labels this model the 'Large Project' version. One reviewer describes the sprayer drawing paint straight from a bucket, so the figure is best read as a project size, as listed.

**What hose comes with the InoKraft MaXpray M1?**

Included Components lists a 7.6 m hose, and the 'Hose Length' field says 25 Feet — the same length given in different units.

**What do buyers say about the InoKraft MaXpray M1?**

It holds 4.1 out of 5 from 135 ratings. One reviewer reports doing an entire house exterior with it; another used a separately bought 411 nozzle to do 60 m of fence in two hours.

**Will the InoKraft MaXpray M1 cut out during a long job?**

The listing notes built-in overheat protection (CE compliant) that may stop the unit during long or heavy use. It describes this as normal, with a cool-down of about three minutes before restarting.

**Is the InoKraft MaXpray M1 suitable for beginners?**

The listing says it is friendly to beginners, citing user guides and YouTube tutorials, and notes a spray gun with a 360° swivel joint for control.