# Scheppach DP60 Bench Pillar Drill, 710W, 13mm Chuck

Source: https://www.ranked10.co.uk/home/best-pillar-drills/scheppach-dp60-pillar-drill
Ranked #3 in "Best Pillar Drill 2026: 9 Ranked, and the Numbers That Don't Add Up": https://www.ranked10.co.uk/home/best-pillar-drills

- Price: £159.00 (checked on Amazon UK on 2026-09-18)
- Amazon rating: 4.1 from 414 ratings
- Buy on Amazon: https://www.amazon.co.uk/dp/B08D87DDDK?tag=ranked10-21

The Scheppach DP60 is a 710W bench pillar drill with a two-speed gearbox, a digital display for speed and drilling depth, a cross-line laser and a 1.5–13mm keyless chuck. It sits third in this guide at £159.00, with 4.1 out of 5 from 414 ratings.

The figure worth checking on this listing is the wood capacity. The fourth bullet says the drill bores holes up to 40mm in wood and 13mm in steel, while the spec table further down the same page gives 13 millimetres for Drilling Capacity Wood and 13 millimetres for Drilling Capacity Metal. Two wood numbers, one page. The other odd entry is Amperage: 16 Amps sitting beside a 710W motor on 230V — that reads like a supply figure, not what the motor pulls. Everything below is taken from the Amazon listing for the DP60, not from testing we carried out ourselves.

## Specification

| Field | Value |
|---|---|
| Price | £159.00 |
| Rating | 4.1 out of 5, from 414 ratings |
| Motor | 710W, 230V corded electric |
| Amperage (as listed) | 16 Amps |
| Chuck | Keyless, 1.5–13mm |
| Drilling capacity, wood | 13mm in the spec table; the bullet says 40mm |
| Drilling capacity, metal | 13mm |
| Speeds | 2 ranges, 170–880rpm and 490–2600rpm |

## Questions people ask

**What motor does the Scheppach DP60 use?**

The listing gives a 710W variable-speed motor running on 230V, with a two-speed gearbox covering 170–880rpm and 490–2600rpm.

**How large a hole will it drill in wood?**

The bullets say up to 40mm in wood, but the spec table on the same listing gives Drilling Capacity Wood as 13 millimetres. Those two numbers do not agree.

**What size chuck does it take?**

A keyless quick-release chuck with a 1.5–13mm range, so bits up to 13mm without tools.

**Does it have a laser and a work light?**

Yes. The listing describes a cross-line laser for positioning, an integrated LED work light and a digital display showing speed and drilling depth.

**What is the drilling stroke and base size?**

The listing quotes a 100mm drilling stroke, a 350 x 300mm base, a 9.4kg build and a supplied quick-release clamp for flat and round workpieces.

**Why does the spec sheet list 16 Amps?**

The field is given as 16 Amps, while the motor is listed at 710W on 230V, which works out at roughly 3A. The 16A figure looks like a supply or circuit rating rather than the motor's draw.