# Creality 10W Laser Cutter and Engraver, 400 × 415 mm

Source: https://www.ranked10.co.uk/tech/best-laser-engravers/creality-10w-engraver
Ranked #8 in "Best Laser Engraver 2026: 10 Ranked, From £135.99": https://www.ranked10.co.uk/tech/best-laser-engravers

- Price: £269.00 (checked on Amazon UK on 2026-09-16)
- Amazon rating: 4.4 from 20 ratings
- Buy on Amazon: https://www.amazon.co.uk/dp/B0DH2FNFPN?tag=ranked10-21

The Creality 10W engraving machine is number eight in this guide: a £269.00 desktop laser with a 400 x 415mm work area, a quoted spot of 0.06 x 0.06mm and a headline speed of 10,000mm/min. The listing is specific about what the 10W output does — a 5mm basswood board or 3mm black acrylic in a single pass, with paper, wood, leather, plastic and dark acrylic also listed — and it arrives as a 5.03kg package that Creality says goes together in 10 to 20 minutes. Its 4.4 out of 5 comes from 20 ratings.

The number to handle with care is the speed. 10,000mm/min is about 167mm/s. The xTool F2 Ultra at the top of this guide quotes 15,000mm/s, which is 900,000mm/min, and the Woxcker quotes 20,000mm/min, which is 333mm/s. The Creality's figure is not small, but in the same units it is roughly half the Woxcker and a small fraction of the F2 Ultra — the ads mix units, so the digits alone never told anyone how fast a machine is. The price deserves the same care: £269.00 is £107.51 more than the 5.5W Ray5 Mini listed elsewhere in this guide, which quotes a finer 0.04 x 0.04mm spot. The ratings do not fully agree either, and the breakdown is set out below. Everything on this page comes from the Amazon listing and the reviews attached to it; we have not tested the machine ourselves.

## Specification

| Field | Value |
|---|---|
| Price | £269.00 |
| Rating | 4.4 out of 5 from 20 ratings |
| Stated top speed | 10,000mm/min (about 167mm/s) |
| Spot size | 0.06 x 0.06mm |
| Engraving area | 400 x 415mm |
| Single-pass cuts | 5mm basswood; 3mm black acrylic |
| Rating breakdown | 7 at 1 star, 9 at 2 stars, 8 at 4 stars, 76 at 5 stars (as listed) |
| Guaranteed software updates until | Unknown (as listed) |

## Questions people ask

**How fast is the Creality 10W engraver?**

The listing quotes speeds up to 10,000mm/min, which works out at about 167mm/s. That is a different unit from the 15,000mm/s quoted on the xTool F2 Ultra at the top of this guide, which is 900,000mm/min, and half the 20,000mm/min quoted on the Woxcker — compare the units before the digits.

**What can the 10W module cut?**

Creality says the 10W output cuts a 5mm basswood board or 3mm black acrylic in a single pass, and lists paper, wood, leather, plastic and dark acrylic among the materials it handles.

**What software does it use?**

The listing says the Creality 10W works with LightBurn, which it flags as paid, and with LaserGRBL for beginners, which it says supports Windows 7, 8, 10 and XP.

**What do the ratings actually show?**

4.4 out of 5 from 20 ratings. The star breakdown on the same listing shows 7 marks in the 1-star column and 9 in the 2-star column — 16 of the 100 marks shown — which is worth reading next to the headline score.

**How fine is the beam and how big is the work area?**

The listing gives a 0.06 x 0.06mm spot and an engraving area of 400 x 415mm, on an aluminium alloy frame with a steel shaft wheel guide rail. The Ray5 Mini elsewhere in this guide quotes a finer 0.04 x 0.04mm spot.

**What support comes with it?**

The listing offers 12 months of free parts replacement plus technical customer support, and says the machine is typically assembled in 10-20 minutes and includes a focusing plate for tool-free focus adjustment.