# Creality Falcon A1 10W Enclosed Laser Cutter and Engraver

Source: https://www.ranked10.co.uk/tech/best-laser-engravers/creality-falcon-a1-10w
Ranked #4 in "Best Laser Engraver 2026: 10 Ranked, From £135.99": https://www.ranked10.co.uk/tech/best-laser-engravers

- Price: £539.00 (checked on Amazon UK on 2026-09-16)
- Amazon rating: 4.2 from 73 ratings
- Buy on Amazon: https://www.amazon.co.uk/dp/B0F1MX1PQ3?tag=ranked10-21

The Creality Falcon A1 10W is an enclosed laser engraver and cutter that sits fourth in this top ten. It costs £539.00 and arrives with a 387 x 305 mm working area, a built-in camera for live preview and auto-positioning, dual transparent doors with light-filtering covers, and a CoreXY motion system that the listing describes as X and Y axes rigged together with two motors. Creality quotes zero assembly: unbox and engrave in minutes.

The number worth reading slowly is the speed. The listing says 600 mm/s, which is 36,000 mm/min. That is 1.8 times the 20,000 mm/min quoted on the Woxcker machines further up this top ten — the same race, printed in two different units, so the two figures cannot be compared without converting them first. The camera claim comes with an honest caveat in the reviews below, where one owner calls the 600 mm/s "correct" but says the camera could be better. One spec row also contradicts the machine itself: the dimensions are listed as 64 x 55 x 0.1 cm, and a 0.1 cm height does not describe an enclosed unit that Creality also lists at 19.5 kg. Everything on this page comes from the Amazon listing and its customer reviews, not from testing by us.

## Specification

| Field | Value |
|---|---|
| Price | £539.00 |
| Rating | 4.2 out of 5 from 73 ratings |
| Laser power | 10W (per the model name, Falcon A1 10W) |
| Engraving speed | 600 mm/s, which is 36,000 mm/min |
| Working area | 387 x 305 mm |
| Motion system | CoreXY, X and Y axes rigged together with two motors |
| Cutting | Up to 6 mm wood and opaque acrylic, as listed |
| Product dimensions (as listed) | 64 x 55 x 0.1 cm; 19.54 kg |

## Questions people ask

**How fast is the Creality Falcon A1 10W?**

The listing gives 600 mm/s for the CoreXY motion system, which converts to 36,000 mm/min. The Woxcker machines in this top ten are quoted at 20,000 mm/min, or 333 mm/s, so the units have to be converted before comparing them.

**What can the Creality Falcon A1 10W cut?**

The listing says it supports engraving and cutting up to 6 mm wood and opaque acrylic, and one owner reports cutting thin plywood in a single pass.

**Do I need to assemble it?**

No. Creality lists it as zero setup, unbox and engrave in minutes with no assembly.

**Do I need safety goggles?**

The listing says the enclosed covers filter light so no goggles are needed, and the machine has emergency stop buttons plus smoke-purifying fan compatibility.

**Which software does it run?**

Creality's Falcon Design Space, LightBurn (sold separately) and LaserGRBL, according to the listing.

**How is it rated?**

4.2 out of 5 from 73 ratings, with 65 of those 73 ratings at five stars and 8 at one star.