# GWEIKE G2 Pro 30W Fibre Laser Marking Machine

Source: https://www.ranked10.co.uk/tech/best-laser-engravers/gweike-g2-pro-30w-fiber
Ranked #2 in "Best Laser Engraver 2026: 10 Ranked, From £135.99": https://www.ranked10.co.uk/tech/best-laser-engravers

- Price: £1,499.00 (checked on Amazon UK on 2026-09-16)
- Amazon rating: 4.6 from 11 ratings
- Buy on Amazon: https://www.amazon.co.uk/dp/B0F3WQ5G4M?tag=ranked10-21

The GWEIKE G2 Pro 30W is a fibre laser engraver at £1,499.00, second in this guide. The listing gives it a 30W 1064nm source, a 150 x 150 mm working area, an electric lift column for one-button focus, dual red-light positioning and colour marking on 90+ shades across stainless steel and titanium. It is sold for jewellery, metal, leather and dog tags, and the page shows 4.6 out of 5 from 11 ratings.

It is here because of the figure in its own title: 15,000 mm/s. In minutes per minute that is 900,000 mm/min — the same unit trap the guide sets out elsewhere, where the xTool F2 Ultra's 15,000 mm/s and the Woxcker's 20,000 mm/min are quoted in two different units and cannot be read side by side. The listing also claims a "79% increase in efficiency" with no baseline printed for it, and its star breakdown (3★ 11, 4★ 21, 5★ 68) adds to 100 while the same page quotes 4.6 from 11 ratings. Everything on this page is taken from the Amazon listing for the GWEIKE G2 Pro 30W; none of it comes from testing we carried out ourselves.

## Specification

| Field | Value |
|---|---|
| Price | £1,499.00 |
| Rating | 4.6 out of 5 from 11 ratings |
| Stated engraving speed | 15,000 mm/s (900,000 mm/min) |
| Laser source | 30W fibre, 1064 nm |
| Working area | 150 x 150 mm |
| Rating breakdown (as listed) | 3★ 11 / 4★ 21 / 5★ 68 |
| Focus adjustment | Electric lift column, one-button |
| Guaranteed software updates until (as listed) | unknown |

## Questions people ask

**How fast is the GWEIKE G2 Pro 30W?**

The listing states 15,000 mm/s. Converted to the unit other machines in this guide use, that is 900,000 mm/min — the same headline figure the guide quotes for the xTool F2 Ultra, printed in a different unit.

**What does the 79% efficiency increase on the GWEIKE G2 Pro 30W refer to?**

The listing states a "79% increase in efficiency" but does not say what it is measured against, so the advert carries no baseline for that figure.

**How big is the working area on the GWEIKE G2 Pro 30W?**

Engraving size is 150 x 150 mm, and the machine has an electric lift column so focus is adjusted with a button rather than by hand.

**What can the GWEIKE G2 Pro 30W engrave?**

The listing says the 30W 1064nm fibre source deep-engraves metals and marks 90+ colours on stainless steel and titanium, and it is sold for jewellery, metal, leather and dog tags.

**How many ratings does the GWEIKE G2 Pro 30W have?**

The listing shows 4.6 out of 5 from 11 ratings. The star breakdown printed on the same page reads 3★ 11, 4★ 21, 5★ 68, which adds to 100.

**Is the GWEIKE G2 Pro a fibre laser?**

Yes. The listing describes a 30W 1064nm fibre laser with dual red-light positioning and a fully digital galvo scanning system.