# Woxcker L2 MAX 10W Laser Engraving Machine, 300 × 300 mm

Source: https://www.ranked10.co.uk/tech/best-laser-engravers/woxcker-10w-laser-engraver
Ranked #6 in "Best Laser Engraver 2026: 10 Ranked, From £135.99": https://www.ranked10.co.uk/tech/best-laser-engravers

- Price: £389.99 (checked on Amazon UK on 2026-09-16)
- Amazon rating: 4.4 from 45 ratings
- Buy on Amazon: https://www.amazon.co.uk/dp/B0F9DZTS7L?tag=ranked10-21

The Woxcker 10W laser engraver and cutter takes sixth place in this top ten. It is a fully enclosed diode machine with a 300 × 300 mm working area, listed under the style name L2MAX 10 at £389.99 and rated 4.4 out of 5 from 45 ratings. It works with LightBurn, LaserGRBL and CutLabX over Wi-Fi, USB, an app or a TF card.

Its place in the guide comes down to two numbers. The first is speed: "up to 20,000mm/min", which is 333 mm/s — the xTool F2 Ultra further up this top ten is quoted at 15,000 mm/s, or 900,000 mm/min, 45 times as much from what looks like a similar-sized figure. The second is price: at £389.99 this 10W machine costs more than twice either of the 3.5 W Ray5 Mini listings in this guide (£135.99 and £159.78) and more than twice the 5.5 W Ray5 at £161.49. The rating deserves the same scrutiny: 4.4 from 45 ratings reads as broad approval, but the star histogram adds up to 100 — 77 five-star against 11 one-star — so roughly one buyer in nine gave it a single star. The spec table also carries fields that read simply "1" for colour, material and part number. Everything here comes from the Amazon listing for this machine; we have not tested it.

## Specification

| Field | Value |
|---|---|
| Price | £389.99 |
| Rating | 4.4 out of 5 from 45 ratings |
| Star histogram | 77 five-star, 9 four-star, 3 three-star, 11 one-star (adds up to 100) |
| Laser power | 10W |
| Working area | 300 × 300 mm |
| Top speed | 20,000 mm/min, which is about 333 mm/s |
| Enclosure | 360° fully enclosed, with automatic stop protection when opened |
| Weight | 8.62 kg |

## Questions people ask

**How fast is the Woxcker L2MAX 10?**

The listing gives a top speed of 20,000mm/min, which is about 333 mm/s. Several machines in this top ten quote speed in mm/s, so convert before comparing the figures.

**How big is the working area?**

300 × 300 mm. The machine itself measures 54.8 × 47.7 × 21.4 cm and weighs 8.62 kg.

**Is the Woxcker laser enclosed?**

Yes. The listing describes a 360° fully enclosed structure that reduces direct laser exposure and helps contain smoke and dust, with automatic stop protection when the enclosure is opened.

**What software and connections does it use?**

LightBurn, LaserGRBL and CutLabX, over Wi-Fi, USB cable, an app or a TF card for offline work, with JPEG, PNG, SVG, DXF and AI file formats supported.

**What does the Woxcker cost and how is it rated?**

£389.99, rated 4.4 out of 5 from 45 ratings, with the star histogram showing 77 five-star and 11 one-star against a total of 100.

**What can it engrave?**

The listing says the machine is compatible with 400+ materials and uses compression spot technology with a 0.01mm laser focus. The bullet does not name the individual materials.

**Does it need batteries?**

No. The listing states that batteries are neither included nor required.