Lumberjack Benchtop Bandsaw 500W

Is the Lumberjack Benchtop Bandsaw 500W worth buying?

The Lumberjack Benchtop Bandsaw 500W is worth buying at £199.98 if you want the deepest cut on a bench saw under £200, because it passes 115 mm of timber at 90° and 65 mm once the table reaches 45°. It is built for thick boards, wood blanks and furniture parts, and its 500W motor and 245 mm throat make it a small workshop machine rather than a hobby saw for thin sheet.

Twenty-nine owners have rated it 3.7, so you are buying on the numbers rather than on a long record of use. The numbers stand up: a 1,712 mm blade, a 302 x 304 mm tilting table and an all-steel frame at 24 kg. If you would rather pay for a proven record, the Scheppach HBS261 costs £19.02 more and carries 1,434 ratings at 4.1.

How much cut height does the Lumberjack BS250 give you?

Divide the cut height by the price and this saw returns 0.58 mm of timber for every pound, which is £1.74 for each millimetre of depth you gain. That sits between the £119 Scheppach HBS25 at 0.67 mm per pound and the £219 Scheppach HBS261 at 0.59, and it is what the extra £80.98 over the HBS25 actually buys you.

The 115 mm at 90° is the figure that matters, because it clears a 100 mm oak blank that an 80 mm machine cannot take. Angle the table and the ceiling falls to 65 mm at 45°, so a 45° bevel in 65 mm stock is your limit. The 245 mm throat runs level with the HBS261 and lets a board that wide travel past the column for resawing.

What comes in the box with the Lumberjack Benchtop Bandsaw 500W?

The box holds the saw, a 1,712 mm high speed steel blade already sized for the wheels, a long rip fence, a push stick and a spanner. The fence clamps on for repeatable parallel cuts, and the push stick is what keeps your hands clear of the blade on short offcuts. Model number BS250, corded at 230V, and it carries CE and UKCA marks.

The machine stands 83 cm tall on a footprint of 48 x 39 cm, so it needs a bench with clearance behind it for a board to pass through. It weighs 24 kg. In practice that means one person can shift it, but two should lift it onto a bench in the first place. No blade beyond the fitted one and no stand are part of the package, so add both to the £199.98 if you want a floor setup.

Where does the Lumberjack Benchtop Bandsaw 500W fall short?

The review base is thin. Only 29 owners have rated this saw, at 3.7, where the £219 Scheppach HBS261 has 1,434 ratings at 4.1 and the £119 Scheppach HBS25 has 264 at 4.2. Warranty is one year for the machine, against seven years of spare parts availability on the Scheppach saws, which matters if you plan to keep it for a decade.

Cut height drops from 115 mm to 65 mm as the table tilts to 45°, so deep bevels in thick stock are off the table. The blade runs at a single speed, so hardwood and softwood are cut on the same setting. At 24 kg it also resists being moved around, and the £119 Scheppach HBS25, at 14.8 kg, is the saw to look at if your bench doubles as a work surface.

Lumberjack Benchtop Bandsaw 500W vs Scheppach HBS261: which one?

The Scheppach HBS261 wins on capacity and on record, and it costs £19.02 more at £219. It gives 130 mm of cut height against 115 mm, a 550W motor against 500W, two blade speeds of 720 and 1000 m/min against one, and 1,434 owners rate it 4.1. Buy the Lumberjack Benchtop Bandsaw 500W only if £19.02 decides it or if you prefer the 500W bench package with the fence and push stick included.

Against the £119 Scheppach HBS25 the gap runs the other way. The Lumberjack gives you 35 mm more cut height, 245 mm of throat against 200 mm, and 150W more motor for £80.98 extra, while the HBS25 stays portable at 14.8 kg and comes with seven years of spare parts behind it. For thick boards and blanks, pay the £80.98; for standard timber on a bench you share with other jobs, the HBS25 is the better buy.