Rank #1 in Best Table Saw 2026: 10 Ranked, and Three Wattage Claims That Don't Add Up
Bosch Professional GTS 10 XC Table Saw (240 V)
Price and rating as shown on Amazon when we collected them. Both change.
The Bosch Professional GTS 10 XC takes the top spot in this guide at £789.98, rated 4.6 out of 5 from 159 ratings. It is a corded table saw with a 254 mm blade, a sliding carriage, a table widener and a table extension, and Bosch lists its weight as 35 kg. The motor is given as 2,100 watts in the specification table, and no bullet point repeats a wattage, so there is no second figure to check that 2,100 W against.
Two other figures in the same listing do disagree with each other. The bullet points give the voltage as 240 V; the specification table says 230 Volts. The copy describes the supplied blade as 254 x 2.8/1.8 x 30 mm ending in 24, while the specification table gives the number of teeth as 40. The item dimensions in that table read 10L x 10W x 10H millimetres for a saw it also lists at 35 kg, and the star breakdown shown beside the 4.6 rating adds up to 100 rather than 159. Everything on this page comes from the Amazon listing; none of it comes from a test of our own.
How those 159 ratings break down
An average hides its own shape. This is the spread behind the 4.6 stars.
Specification
Exactly as published on the Amazon listing, field for field.
| Price | £789.98 |
|---|---|
| Rating | 4.6 out of 5 from 159 ratings |
| Motor wattage | 2,100 watts (specification table only) |
| Voltage (as listed) | 230 Volts in the specification table, 240 V in the bullet points |
| Blade | 254 x 2.8/1.8 x 30 mm Optiline Wood; the copy ends in 24, the specification table says 40 teeth |
| Item weight | 35 kg |
| Item dimensions (as listed) | 10L x 10W x 10H millimetres |
| Power source (as listed) | Corded electric, listed beside "A batteries required" |
What buyers actually say
Quoted from customer reviews on Amazon
Verified purchase“A good saw. You cannot use it against the wall. Have to get use to using it. The dust extractor doesn't work against the wall. The hose on it is stiff so can't you it against the wall.”
Verified purchase“This is an outstanding table saw. I spent a lot of time reading reviews on a wide variety of saws and this one came out on top. A couple of the reviews on this saw mentioned the amount of play in the mitre sled, I too noticed this out of the box, but after removing the sled and tapping the parallel tracks with a nylon hammer and adding some dry PTFE spray I significantly removed the play. The second "issue" was the fence. If you move the fence holding the bottom it will not be parallel with the T-slot. However if you move from the middle it all works fine. The cut with the standard blade is excellent. I would recommend that you use a digital level box when setting up the saw and then set the adjustment washer accordingly. The adjustment washer is very fiddly, but once set, you can forget. I also read that a few people complained about the dust collection. I use a Festool L class midi extractor which fits perfectly in the supplied dust extraction port on the Bosch and it extracts a large majority of the dust effectively. The stands that are available were not suitable for me as I have no intention of using this as a site saw (it's too heavy anyway!), but needed to move it around the workshop if needed, therefore, I built a cart to the same hight as my project benches so as to use them as feeder tables if needed (see photos). Overall I am very impressed with this saw and I will update when I have used it some more.”
What it is up against
The rivals it was ranked against in Best Table Saw 2026: 10 Ranked, and Three Wattage Claims That Don't Add Up.
Questions people ask
How much does the Bosch Professional GTS 10 XC cost?
The listing price is £789.98.
How powerful is the motor?
The specification table gives 2,100 watts. No bullet point in the listing states a wattage, so that 2,100 W figure stands on its own.
What voltage does the Bosch GTS 10 XC run on?
The bullet points say 240 V and the specification table says 230 Volts. Both figures appear on the same listing.
How many teeth does the supplied blade have?
The copy names an Optiline Wood blade, 254 x 2.8/1.8 x 30 mm, ending in 24; the specification table lists 40 teeth.
What is included with the saw?
Dust extraction adapter, storage for an additional saw blade, parallel guide, push stick, angle guide and one circular saw blade.
Does the listing say how big the saw is?
The specification table gives 10L x 10W x 10H millimetres and 35 kg in the same entry. Those two figures describe very different objects.
Comments
Reader comments are not checked against the manufacturer's claims above.
No comments yet
Be the first to add something we missed — a price change, a spec that turned out wrong, or how one of these held up.
Leave a comment
No account needed. Own one of these? Tell other readers how it actually performed.