Rank #5 in Best UPS Battery Backup 2026: 9 Ranked, and Why 2200VA Isn't 2200W
PowerWalker VI 2200VA / 1200W LCD
- Rating
- 4.1
- Ratings
- 229
- Rank
- #5
Price and rating as shown on Amazon when we collected them. Both change.
PowerWalker's VI 2200VA/1200W is the fifth entry in this guide: a UPS with a built-in boost and buck AVR function, six IEC C13 outlets, an LCD status screen and USB monitoring, listed at £179.99 with 4.1 stars from 229 ratings. The name carries two numbers and only one of them is the figure you can actually pull: 2200VA is the headline, 1200 W is the output rating that appears in the Maximum Power, Output Wattage and Wattage fields — a ratio of about 1.8, in step with the rest of this list.
The listing's other fields are where it gets untidy. Voltage reads "2200 Volts", which is the VA figure sitting in a voltage field, while Input Voltage and Output Voltage both read 230 Volts. Runtime reads "0 minute", and Output Current reads 0.55 Amps alongside that 1200 W output rating. The unit is listed at 10.2 kg and 36.4 x 13.9 x 19.5 cm (D x W x H). Everything on this page comes from the Amazon listing as it stands — we have not tested this unit ourselves.
How those 229 ratings break down
An average hides its own shape. This is the spread behind the 4.1 stars.
Specification
Exactly as published on the Amazon listing, field for field.
| Price | £179.99 |
|---|---|
| Rating | 4.1 out of 5 from 229 ratings |
| Headline capacity | 2200 VA |
| Output wattage | 1200 W |
| Voltage (as listed) | 2200 Volts |
| Runtime (as listed) | 0 minute |
| Outlets | 6 x IEC C13 |
| Weight | 10.2 kg |
What buyers actually say
Quoted from customer reviews on Amazon
Verified purchase“Two year on updateStill working but after adding additional load realised I needed to add a second UPS and to split the load.Got a second UPS but a different model, a PowerWalker VI Series 2200VA/1320W, which is even better as it has UK plug and sockets, its also cheaper, smaller and higher spec.One year on updateSo today powered up the attached devices and the UPS fan kicked in - it is noisy - looking at the Winpower manager software it showed "Output: AVR mode" - hadn't seen that (or the fan running) before - work comes first so I just left it - a couple of hours later the fan stopped - Winpower manager showed "Output: Normal mode" (see picture). You can see the input voltage is 249V - when it was in AVR mode the input voltage was over 250V (upto 254V) - it seems the UPS was protecting devices from over voltage. Made me think the reviews that say the fan run all the time might be due to supply overvoltage.Would buy this model/brand again.Working from home you notice all the power cuts and blips - already had Jackery power stations but they are offline and I still lost work when the mains power fails - got a small APC UPS to power modem, router and 4G backup modem but needed somthing bigger for a large tower pc, its 3 screens, 2 laptops external screens and sundry hubs - this power walker UPS 1200w seemed suitable and very good value - it worked - the windows monitoring sofware reports 18-20% load and a 22-24 minute expected run time - didn't need to test as soon after it was installed there was a power cut - allowed plenty of time to bring the Jackerys online (powering the UPSs) - probably paid for itself first use - can't hear it over the tower pc in standby - makes lots of noise and beeps during a power cut (which is good) and some noise while recharging - front blue lcd display is easy to read but not too bright - And don't forget you also need light in a power cut - keep some rechargeable torches handy”
Verified purchase“Have had this 5yrs now and used it continuously to power and protect my home networking equipment. It's managed to keep a modem and Ubiquiti switch, AP and router powered for over 2hrs. It's also protected the equipment when my mains voltage was too high. After 5yrs the batteries needed recycling - was pleased to be able to do that relatively easily myself for around £45 - just search for equivalents to `Leoch DJW12-9`. Would buy again.”
What it is up against
The rivals it was ranked against in Best UPS Battery Backup 2026: 9 Ranked, and Why 2200VA Isn't 2200W.
Questions people ask
How many watts can this PowerWalker actually deliver?
The spec table lists 1200 Watts, and both the Output Wattage and Wattage fields repeat 1200. The 2200 figure is the VA rating carried in the product name.
Why does the listing say 2200 Volts?
The Voltage field reads "2200 Volts", which is the VA number copied into a voltage field. Input Voltage and Output Voltage both read 230 Volts.
What does a Runtime of 0 minute tell me?
The Runtime field reads "0 minute", so it gives you no usable backup-time figure. The listing does state cold start and a built-in boost and buck AVR function.
How many devices can I plug in?
Six, via the six IEC C13 outlets listed. The power plug type is given as Type G.
Does it support USB monitoring?
Yes — the bullets list an easily accessible USB connection for monitoring, HID support, and RJ-11/RJ45 surge protection alongside the six IEC outlets.
How big and heavy is the PowerWalker VI 2200VA?
The listing gives 36.4 x 13.9 x 19.5 cm (D x W x H) and 10.2 kg. The Form Factor field says Rack, though one reviewer describes the unit sitting under a desk.
Comments
Reader comments are not checked against the manufacturer's claims above.
No comments yet
Be the first to add something we missed — a price change, a spec that turned out wrong, or how one of these held up.
Leave a comment
No account needed. Own one of these? Tell other readers how it actually performed.