Rank #2 in Best Laser Engraver 2026: 10 Ranked, From £135.99
GWEIKE G2 Pro 30W Fibre Laser Marking Machine
- Rating
- 4.6
- Ratings
- 11
- Rank
- #2
Price and rating as shown on Amazon when we collected them. Both change.
The GWEIKE G2 Pro 30W is a fibre laser engraver at £1,499.00, second in this guide. The listing gives it a 30W 1064nm source, a 150 x 150 mm working area, an electric lift column for one-button focus, dual red-light positioning and colour marking on 90+ shades across stainless steel and titanium. It is sold for jewellery, metal, leather and dog tags, and the page shows 4.6 out of 5 from 11 ratings.
It is here because of the figure in its own title: 15,000 mm/s. In minutes per minute that is 900,000 mm/min — the same unit trap the guide sets out elsewhere, where the xTool F2 Ultra's 15,000 mm/s and the Woxcker's 20,000 mm/min are quoted in two different units and cannot be read side by side. The listing also claims a "79% increase in efficiency" with no baseline printed for it, and its star breakdown (3★ 11, 4★ 21, 5★ 68) adds to 100 while the same page quotes 4.6 from 11 ratings. Everything on this page is taken from the Amazon listing for the GWEIKE G2 Pro 30W; none of it comes from testing we carried out ourselves.
How those 11 ratings break down
An average hides its own shape. This is the spread behind the 4.6 stars.
Specification
Exactly as published on the Amazon listing, field for field.
| Price | £1,499.00 |
|---|---|
| Rating | 4.6 out of 5 from 11 ratings |
| Stated engraving speed | 15,000 mm/s (900,000 mm/min) |
| Laser source | 30W fibre, 1064 nm |
| Working area | 150 x 150 mm |
| Rating breakdown (as listed) | 3★ 11 / 4★ 21 / 5★ 68 |
| Focus adjustment | Electric lift column, one-button |
| Guaranteed software updates until (as listed) | unknown |
What it is up against
The rivals it was ranked against in Best Laser Engraver 2026: 10 Ranked, From £135.99.
Questions people ask
How fast is the GWEIKE G2 Pro 30W?
The listing states 15,000 mm/s. Converted to the unit other machines in this guide use, that is 900,000 mm/min — the same headline figure the guide quotes for the xTool F2 Ultra, printed in a different unit.
What does the 79% efficiency increase on the GWEIKE G2 Pro 30W refer to?
The listing states a "79% increase in efficiency" but does not say what it is measured against, so the advert carries no baseline for that figure.
How big is the working area on the GWEIKE G2 Pro 30W?
Engraving size is 150 x 150 mm, and the machine has an electric lift column so focus is adjusted with a button rather than by hand.
What can the GWEIKE G2 Pro 30W engrave?
The listing says the 30W 1064nm fibre source deep-engraves metals and marks 90+ colours on stainless steel and titanium, and it is sold for jewellery, metal, leather and dog tags.
How many ratings does the GWEIKE G2 Pro 30W have?
The listing shows 4.6 out of 5 from 11 ratings. The star breakdown printed on the same page reads 3★ 11, 4★ 21, 5★ 68, which adds to 100.
Is the GWEIKE G2 Pro a fibre laser?
Yes. The listing describes a 30W 1064nm fibre laser with dual red-light positioning and a fully digital galvo scanning system.
Comments
Reader comments are not checked against the manufacturer's claims above.
No comments yet
Be the first to add something we missed — a price change, a spec that turned out wrong, or how one of these held up.
Leave a comment
No account needed. Own one of these? Tell other readers how it actually performed.