Best Screwdriver Sets 2026: 10 Ranked, and Why the Count Lies

This one sits first because it wins on the two measures that matter most here. At £11.99 for 73 pieces it works out at roughly 16p a piece, and 12,571 ratings at 4.6 give it a sample size no other screwdriver sets in this list come close to. Of the ratings shown, 76% are five-star and one is one-star.

The driver is chrome vanadium steel, heat treated for hardness, with a three-way ratchet: clockwise, anti-clockwise and a locked position. The base spins freely, so you can keep pressure on the screw while turning the handle. The plastic case has a dedicated slot for the driver, the sockets and the bits, and the bits split into magnetic ones for appliances and non-magnetic precision bits for watches and small electronics.

That said, the listing's own warning is the reason to think twice. Precision bits are not meant for oversized screws that need large torque, and the spec table lists the recommended uses as electronics and watches — not joinery. The 73 count includes sockets, the handle and the case, so it is not 73 bits. At 626g it also stays in the toolbox rather than in a pocket.

By contrast with the 73-piece set, this one asks £11.68 for 41 pieces. That is about 28p a piece against 16p, so the cheaper of the two is also the smaller. The rating is 4.5 from 4,058 buyers, with 68% of them five-star and three one-star.

The mechanism is from the same family: three settings — forward, reverse and locked — plus a free-spinning base for keeping pressure on the screw. The steel is chrome vanadium, heat treated, and the case holds the driver, sockets and bits. It weighs 526g and measures 20 by 11.4 by 3cm. In practice the brief differs from the electronics set above: the spec table points this one at home improvement and auto repair, with flat, Phillips and hex heads listed.

The catch is arithmetic. If you want the largest piece count of any of these screwdriver sets for about £12, the 73-piece version gives you 32 more for 31p more. Buy this one only if the smaller case and the 100g weight saving matter, or if the listed uses fit your work better.

STANLEY tops the rating table at 4.7 from 1,252 ratings, with 82% of them five-star. Even so, the listing cannot agree with itself on what is in the box. The first bullet opens with '11 PIECE SCREWDRIVER SET' and then refers to '10 precision screwdrivers'. The title says 10 pc, the spec table says Number of Items: 10, and the includes list counts five slotted plus five Pozidriv — ten in total.

These are fixed drivers, not bits: chrome vanadium bars, nickel plated against rust, magnetic tips and cushion grip handles. The slotted sizes run from 3mm by 75mm up to 8mm by 150mm, and the Pozidriv from PZ0 by 60mm to PZ3 by 150mm. The recommended use is furniture assembly, which makes this the best screwdriver set for flat pack furniture of the ten here — the sizes match the fixings you meet in a flat-pack box.

The catch: no ratchet, no bit holder and nothing interchangeable. At £15.00 for ten drivers it is £1.50 each, roughly ten times the per-piece cost of the 73-piece set at number one. The spec table also states 'No warranty.' If you want one handle and a wall of bits, this is the wrong shape of tool.

At £8.28 this is the lowest price on the list, and it also carries the lowest rating in the top four at 4.4. The count is thin: the bullet describes one handle and 12 bits — SL4 to SL6, PH1 to PH3, T15 to T25 and H3 to H5 — which works out at about 69p a bit, roughly four times the per-piece cost of the 73-piece set. Meanwhile the spec table's Number of Items reads 13 while Unit Count reads 12.0.

The bits store inside the handle, so there is no tray to open and nothing to lose. The driver has the same three settings as the rest of the Amazon Basics range — fixed, forward and reverse — with a free-spinning base. The steel is chrome vanadium, heat treated and corrosion resistant, and the tool weighs 259g at 23.5cm long. In practice it is a kitchen-drawer tool rather than a kit.

Worth noting what you give up. There is no storage case here, so anyone after a screwdriver set with case should look at the 41-piece or 73-piece versions instead. The 4.4 rating comes with four one-star and two two-star ratings, and 12 bits will not cover Torx security or square heads.

This magnetic screwdriver set costs £19.49 for 42 pieces, about 46p each, and its rating is 4.6 from 1,857 buyers. Where other screwdriver sets blur the total, this one itemises it: four cross-head screwdrivers, seven precision screwdrivers, four slotted, one flexible bit extension, one bit holder and 25 extra bits. That comes to 42, exactly as advertised.

The drivers and bits are chrome vanadium steel with non-slip rubber handles, and the case has a shaped slot for every piece, which is the point of buying a set rather than single drivers. It weighs 1.74kg, the heaviest here, and the colour is black, silver and yellow. Worth noting: the spec table lists the material as 'Rubber' while the bullets describe chrome vanadium steel — the two entries describe different parts of the same set.

The catch is what is missing. There is no ratchet mechanism, and the head style is listed only as Phillips and flat — no Torx, no hex and no square in the fixed drivers, so the 25 extra bits do the odd jobs. At 1.74kg it stays on the shelf rather than in a bag.

The name says 25-in-1. The bullet says 12 double-ended bits, with the tip sizes listed: Torx security T10H to T30H, Phillips PH0 to PH3, flat SL3 to SL6, hex H3.0 to H6.0, square SQ1 and SQ2, and Pozidriv PZ1 to PZ2. Which means 12 physical bits is the real figure, twice that in usable tips, plus one handle. At £9.99 that works out at 83p a bit, or 40p a piece if you accept the 25.

The handle is PP and ABS with a dual-material grip, and the bits are CRV steel quoted at HRC52. An adjustable extension shaft of 4.53 inches reaches recessed screws, and every bit is labelled and stored inside the handle. The weight is 168g in the bullet and 160g in the spec table — eight grams apart, which tells you how loose the copy is. The rating is 4.5 from 1,233 buyers.

The catch is coverage. Twelve bits cannot match the 42-piece BLOSTM or the 73-piece set at the top, and there is no case — the bits sit loose in the handle. As a multi bit screwdriver set for a drawer it works; as your only set for a house move it will leave gaps.

This is the highest-rated of the screwdriver sets on the list at 4.8, and also one of the least reviewed at 127 ratings. The title figure is 145-in-1, and the set does ship 120 bits, which the listing states plainly. The remaining 25 pieces are the handle, the extension rod, the magnetic work mat, the magnetiser, the anti-static wrist strap and the Oxford bag. The headline counts tools and packaging, not just bits.

The 120 bits cover Torx, Phillips, hex, pentalobe, tri-wing, square and gamebit, which is why the listing points at iPhones, MacBooks, consoles and glasses. Every bit is hardened 60HRC chrome vanadium. The extension rod is adjustable for deep-set screws, and the magnetic mat holds small parts in place. Total weight is 870g, and the set packs into a tear-resistant bag with a nylon handle.

As a result, the fit is narrow. If you are building furniture or working on anything needing real torque, precision bits are the wrong tool, and the listing says as much. There is no ratchet, and 127 ratings is a thin sample for a £25.99 purchase. Buy it for electronics, not for the shed.

However good the hardware looks, the numbers here do not agree. The title says 68-in-1. The set name in the spec table reads 'KELIN 66-in-1 Magnetic Screwdriver Set', and the model number carries 66 as well. The bullets then describe 68 pieces storing in the case, and break them down as six long, 32 short and 24 precision — 62 bits. The rating is 4.6 from 445 buyers.

What is described is a ratchet driver with a 58-tooth mechanism and a claimed 50Nm of torque, S2 alloy steel bits with black phosphate coating, colour-coded rings for quick identification, and a magnetic recharging slot in the case to restore magnetism. The handle is aluminium in the bullets; the spec table lists alloy steel for the shank instead. It weighs 580g and costs £29.99, about 44p a piece.

The catch is verifiability. 'Saves 80% effort' and '50Nm torque' are claims with no method attached, so treat them as marketing. Crucially, you cannot tell from the page whether 68 or 66 items arrive. If the exact count matters to you, buy elsewhere; if you want a ratchet with a large bit selection, this is still a 4.6-rated kit.

This is the most expensive set per piece on the list. £34.99 for 42 items is about 83p each, five times the per-piece cost of the 73-piece set at number one. The parts are eight 45mm long bits and 32 25mm short bits in PH, SL, PZ and U-shaped profiles, plus the handle. The rating is 4.7 from 884 ratings, the second-highest score here.

The driver has a T-handle and a ratchet that switches between forward, reverse and locked. The bits are S2 alloy steel and magnetised, so they hold the screw while you position it. The handle is described as aluminium alloy in the bullets, while the spec table lists zinc alloy — two different metals for the same part, depending on which field you read. It weighs 510g and the item length is given as 17cm.

In short, you are paying for the T-handle and the ratchet feel rather than for volume — most screwdriver sets in this list cost far less per piece. There are no precision bits, so it will not substitute for a precision screwdriver set, and no sockets either. If you mainly want coverage for occasional jobs, the 73-piece set at £11.99 does more for a third of the money.