Rank #8 in Best Laser Engraver 2026: 10 Ranked, From £135.99
Creality 10W Laser Cutter and Engraver, 400 × 415 mm
Price and rating as shown on Amazon when we collected them. Both change.
The Creality 10W engraving machine is number eight in this guide: a £269.00 desktop laser with a 400 x 415mm work area, a quoted spot of 0.06 x 0.06mm and a headline speed of 10,000mm/min. The listing is specific about what the 10W output does — a 5mm basswood board or 3mm black acrylic in a single pass, with paper, wood, leather, plastic and dark acrylic also listed — and it arrives as a 5.03kg package that Creality says goes together in 10 to 20 minutes. Its 4.4 out of 5 comes from 20 ratings.
The number to handle with care is the speed. 10,000mm/min is about 167mm/s. The xTool F2 Ultra at the top of this guide quotes 15,000mm/s, which is 900,000mm/min, and the Woxcker quotes 20,000mm/min, which is 333mm/s. The Creality's figure is not small, but in the same units it is roughly half the Woxcker and a small fraction of the F2 Ultra — the ads mix units, so the digits alone never told anyone how fast a machine is. The price deserves the same care: £269.00 is £107.51 more than the 5.5W Ray5 Mini listed elsewhere in this guide, which quotes a finer 0.04 x 0.04mm spot. The ratings do not fully agree either, and the breakdown is set out below. Everything on this page comes from the Amazon listing and the reviews attached to it; we have not tested the machine ourselves.
How those 20 ratings break down
An average hides its own shape. This is the spread behind the 4.4 stars.
Specification
Exactly as published on the Amazon listing, field for field.
| Price | £269.00 |
|---|---|
| Rating | 4.4 out of 5 from 20 ratings |
| Stated top speed | 10,000mm/min (about 167mm/s) |
| Spot size | 0.06 x 0.06mm |
| Engraving area | 400 x 415mm |
| Single-pass cuts | 5mm basswood; 3mm black acrylic |
| Rating breakdown | 7 at 1 star, 9 at 2 stars, 8 at 4 stars, 76 at 5 stars (as listed) |
| Guaranteed software updates until | Unknown (as listed) |
What buyers actually say
Quoted from customer reviews on Amazon
Verified purchase“Fantastic, I love it. I use it with light burn.Whilst lightburn is great software to use with my engraver there is a £92 purchase involved and is pretty decent.The engraver really is a decent buy and I'm really glad I did.I've started some various projects engraving wood and now leather after understanding the settings I'm starting to master the engraving and cutting techniques with the help of light burn.If your considering buying this......Its worth it.”
Verified purchase“A very solid feeling, well designed product.Assembly took around 20min. And as soon as connected and aligned it faultlessly and cleanly cut out the supplied test piece (eagle). Cant wait to download lightburn and start learning to use it for more complex stuff. Would recommend as good starter engraver/cutter.”
What it is up against
The rivals it was ranked against in Best Laser Engraver 2026: 10 Ranked, From £135.99.
Questions people ask
How fast is the Creality 10W engraver?
The listing quotes speeds up to 10,000mm/min, which works out at about 167mm/s. That is a different unit from the 15,000mm/s quoted on the xTool F2 Ultra at the top of this guide, which is 900,000mm/min, and half the 20,000mm/min quoted on the Woxcker — compare the units before the digits.
What can the 10W module cut?
Creality says the 10W output cuts a 5mm basswood board or 3mm black acrylic in a single pass, and lists paper, wood, leather, plastic and dark acrylic among the materials it handles.
What software does it use?
The listing says the Creality 10W works with LightBurn, which it flags as paid, and with LaserGRBL for beginners, which it says supports Windows 7, 8, 10 and XP.
What do the ratings actually show?
4.4 out of 5 from 20 ratings. The star breakdown on the same listing shows 7 marks in the 1-star column and 9 in the 2-star column — 16 of the 100 marks shown — which is worth reading next to the headline score.
How fine is the beam and how big is the work area?
The listing gives a 0.06 x 0.06mm spot and an engraving area of 400 x 415mm, on an aluminium alloy frame with a steel shaft wheel guide rail. The Ray5 Mini elsewhere in this guide quotes a finer 0.04 x 0.04mm spot.
What support comes with it?
The listing offers 12 months of free parts replacement plus technical customer support, and says the machine is typically assembled in 10-20 minutes and includes a focusing plate for tool-free focus adjustment.
Comments
Reader comments are not checked against the manufacturer's claims above.
No comments yet
Be the first to add something we missed — a price change, a spec that turned out wrong, or how one of these held up.
Leave a comment
No account needed. Own one of these? Tell other readers how it actually performed.