Best Mitre Saw 2026: 10 Ranked, and the Numbers That Don't Add Up

The GCM 12 GDL takes first place on hardware, not on marketing. Bosch's patented glide arm replaces the usual twin rails, and it carries a 305mm blade with 72 teeth — the finest tooth count in this list, which is what you want in a mitre saw for woodworking on trim, architrave and finished timber. It is the best mitre saw here for anyone cutting to length all day.

In practice, the glide arm keeps the machine compact front to back while still letting a 305mm blade travel through the work, and the double line laser marks both edges of the kerf rather than a single dot. The 2000W motor turns that blade at 3800 RPM. At 29.4 kg it is a bench saw: you mount it and leave it.

However, the same listing disagrees with itself. The scope-of-supply bullet says "Voltage 240 V" while the specification table says 230 Volts, and the blade length field reads 670 Millimetres on a saw sold with a 305mm blade. It also lists one lithium-ion battery as required on a corded machine. That said, the contradiction here is in the paperwork, not the cutting.

Second place goes on capacity per pound: 2000W, a 330mm cross cut and both a 24-tooth and a 48-tooth 305mm blade in the box for £299. As a mitre saw 305mm blade package, it is the only saw under £300 here that ships with two of them.

In practice, the double bevel is the feature that earns its keep — the head tilts 45° left and right, so you are not flipping the workpiece for every second cut. The laser line and the cross-cutting gauge make repeat work on flooring and timber sections straightforward, and the 330mm cross cut takes wide boards in one pass.

Meanwhile, the same page quotes two different speeds: 7000 RPM in the specification table and 3800 rpm in its first bullet. The table also names high speed steel as the blade material while the description promises two tungsten carbide tipped blades, and the surface recommendation field says aluminium and plastic on a machine sold for woodworking. Worth noting, none of that changes what arrives in the box.

Third place goes to the saw that is easiest to live with: 12 kg, a 1400W motor and a 4500 RPM blade speed. If the best mitre saw is the one you carry to the job, weight matters more than wattage, and this is 17 kg lighter than the Bosch at the top.

In practice, the XPS system casts a shadow of the blade onto the work, so the kerf is marked by the blade itself with no laser to align and no battery to fail. It gives 62 x 250mm at 90°, which covers skirting, architrave and most second-fix work, and the 4500 RPM cuts softwood quickly.

Worth noting, the page's bullet list repeats "Powerful 1400 watt motor" word for word instead of describing anything else, and the specification table calls the blade shape "Rectangular" and the cutting angle 90 degrees. Those are autofilled fields, not checked ones. Even so, 62mm depth of cut is modest beside the 305mm machines above, so if you rip 4x2 on the flat, look higher up this page.

This is the saw to buy if you cut metal and wood on the same job. The 2000W motor turns a 255mm multi-material TCT blade at 1900 RPM — deliberately slow, because low blade speed is what stops a carbide tip overheating in steel.

In practice, the 50°-50° mitre range and 45°-45° double bevel cover every common angle, and the trench-cut facility lets you halve a workpiece without moving it. Being a double bevel mitre saw, it tilts both ways without you turning the stock. The Plus pack adds a top clamp, a front clamp, a dust bag and a spare wood blade, so you are not buying holders on day one.

That said, the 3-year warranty is valid only if the saw is bought in the UK, and the specification field lists the surface recommendation as "Wood" on a machine whose whole argument is cutting steel and aluminium. At 18.2 kg it is a bench saw too. If your work is timber only, the slower speed costs you finish quality against the 4500 RPM saws here.

This is one of two cordless mitre saws in this top ten, and the better rated at 4.8 stars — though from only 70 reviews, the smallest sample here. It is arguably the best mitre saw for site work where there is no power, and the 36V badge on the box is two 18V LXT batteries run in series. That is a voltage figure, not a single pack, and neither pack is included.

In practice, the brushless motor keeps runtime up and the 5700 RPM is the highest blade speed on this page. The double sliding mechanism takes a 190mm blade through more stock than a fixed head would manage, and the bevel range is 45° left against 5° right — fine for skirting, not for two-way compound work.

However, the specification table lists "Wattage: 1 watts" and a "Triangular" blade shape, and the manufacturer warranty description says "No warranty" while the listing's own warranty field says limited warranty. Either way, this is a body-only purchase: budget for two 18V batteries and a charger on top of £599.95.

Sixth place goes to the second cordless machine, and the runtime claim is the headline: up to 535 cuts in 82mm skirting board from a single 4Ah XR battery. That is a specific, checkable figure, which is more than most listings on this page manage.

In practice, the 184mm blade and horizontal slide rails give a 50 x 250mm cross cut at 90°, and the 590W motor spins at 3750 RPM. Mitre and bevel detents let you set the common angles by feel rather than by reading a scale, and the aluminium base keeps the saw stable while staying light enough to carry.

However, the warranty fields disagree with each other: the type says "Extended", the description says "1 year". The dimension field lists 25.2 x 22.1 x 15.8 centimetres against a 12.5 kg weight, which cannot both describe a mitre saw, and "1 x mitre saw" is the entire included components list. As a result, add the price of a battery and charger before comparing it with the corded saws above.

Seventh place on capacity per pound: 1650W, a 305mm blade with 60 teeth included and 3400 RPM. If the best mitre saw for your workshop is simply the biggest blade you can afford, this is it — it is the second double bevel mitre saw in this top ten and the cheaper of the two 305mm machines.

In practice, the LED shadow line projects the outline of the blade rather than a laser dot, so the kerf is marked by the blade itself and cannot drift out of alignment. The 50° left and 60° right mitre range is wider than most here, and the extension wings support longer workpieces when you are cutting a run of decking boards.

Worth noting, the product highlight claims a 350mm cutting capacity while the specification table lists a 305mm blade and no cross-cut figure to check it against. Crucially, at 25.5 kg it is the heaviest machine here after the Bosch, and its 4.4 stars from 287 reviews is level with the Scheppach HM216L at the bottom of this list.

Eighth place on value: £129.98 buys a 1200W motor, a 20-tooth multi-material TCT blade and a 50°-50° mitre range. It is the cheapest machine on this page by £79, and the most reviewed, at 4.7 stars from 857 ratings. As a budget mitre saw, nothing else here is within £80 of it.

In practice, the blade geometry is the point. The multi-material TCT blade turns at 1900 RPM, slow for wood but slow enough that the same blade cuts steel, aluminium, plastic and wood with embedded nails. The 210mm slide travel means it handles wider stock than the 185mm blade suggests, and the 10 kg weight makes it a shelf saw rather than a bench fixture.

That said, the listing is inconsistent about the blade itself: the title says 210mm twice, while the specification table lists a 185mm blade length and the blade included is an R185TCT-20MS. The slide is 210mm and the blade is 185mm. At the same time, the included components list is simply "Mitre Saw" — no clamps, no bag, no stand.

Ninth place, and the joint-highest rated saw here at 4.8 stars alongside the Makita — this time from 75 reviews. The 13.5 kg weight is the selling point: light enough to shift one-handed between rooms, with a vertical handle and a lower guard lock-out button that work for left and right handed users.

In practice, 1400W drives a 216mm blade at 5500 RPM, second only to the Makita, and the 270mm horizontal cutting capacity covers standard skirting and architrave. Mitre detents at the common angles save time on repeat cuts, and the 1500W-class motor is not working hard in softwood.

By contrast, the specification table is a mess. Voltage is listed as "24" with no unit on a 240V corded saw, the blade length is given as 270 Millimetres when the saw takes a 216mm blade and 270mm is the horizontal cut capacity, and the tooth count reads 32 against a supplied Optiline blade listed as 24 teeth. Even so, at £237 it undercuts every 216mm saw above it.